Clogged drains are a typical plumbing problem that may quickly turn into a plumbing emergency if not addressed. If you have the necessary plumbing gear and know-how, you can fix a minor blocked drain yourself. Should your do-it-yourself repair run into unanticipated emergency plumbing issues, it’s always a good idea to have your local plumber on hand. Feel free to visit their website at check out more for more details.
Get familiar with the plumbing basics on unclogging and clearing drains, whether you decide to DIY or take the easy and safe route and call in a local emergency plumber. The trap at the bottom of the drainpipe serves to “catch” some water in the line and create a water seal that prevents noxious sewer gases from entering the house. Due to a buildup of hair, soap scum, and bodily oils and fats, bathroom drains in showers, tubs, and sinks can become clogged.
A slow draining bathtub indicates a partially clogged drainpipe that needs to be cleared quickly to avoid complete pipe closure, suggesting a plumbing emergency. If your bath drain becomes clogged, the plumbing instructions below can help you figure out what to do.
1. First, look for hair and other debris in the drain hole that you can easily pull out to clear the clog. Otherwise, bend the wires of an old coat hanger to plug the clog and pull it out.
2. If you can’t find the source of the clog, use the plunger in your do-it-yourself fix. Place the plunger over the drain opening, fill the tub with enough water to cover the plunger’s cup, and push up and down the plunger after closing the overflow outlet with a rug. This process should be repeated up to 6 times, with the pressure exerted by the plunger lifting the block and allowing the pipe to open. If the water quickly drains away as you lift the plunger, the clog has been effectively eliminated; otherwise, repeat the plunging process until you reach a point of swift water drainage.
3. If a plunger isn’t working to remove a clogged drain, you’ll need to use a plumber’s snake. Run water, feed the snake, and turn it about 3 feet into the drainpipe till it hits the barrier. When you turn the plumber snake as you push ahead, it will hook onto the blockage and draw it out. Rep the procedure till the obstruction is broken open.
4. If your drain is still blocked after utilising a plunger and a plumber’s snake, it’s time to call your local emergency plumbing services.
Avoid pouring chemicals to clear the clogged drainpipe at all costs, as this poses a severe risk of the drain overflowing and spraying deadly chemicals in your or your plumber’s faces. Chemicals are not only hazardous to consumers, but they also harm the ecosystem.