Investing additional time and resources into adequately preparing for your exterior painting project is a direct investment in both time and money. Exterior painting preparation has been shown to extend the life of the paint, improve its appearance, and prevent other issues such as mould formation, chipping, and peeling. Read and follow the exterior painting planning steps below to get started on your promising exterior painting project. If you simply aren’t up to painting on your own, make it easier on yourself by hiring a competent and trustworthy painter in your area. Prepare yourself in advance. Exterior Painting Near Me offers excellent info on this. Since exterior panting preparation is a dirty work, wear clothes that you don’t mind getting dirty. Additionally, you will be getting wet, so keep that in mind when choosing your clothing for this project and preparing for it ahead of time. Wearing protective goggles is also necessary and secure, particularly during the scraping process. Chipped paint and other materials can easily fly into your eyes, causing severe eye damage. Don’t take any chances; instead, be cautious: Make sure you have a decent pair of goggles or safety glasses on hand. Work gloves are also important for protecting your hands when preparing food at home or in the workplace.
Get Rid of the Dirt
This is necessary because paint will not adhere to any form of dirt, especially outdoor dirt such as grime and dust. While some experts advise using a power washer for this task, others warn that it can do more damage than good. Since it could push water deep into or behind wood siding or trim, this is a concern. If the soffit becomes too wet, the wood will swell and the fresh paint will rub off easily. Even if your home does not have wood siding, a hose with a good water flow can be preferable to a power washer.
Use a special brush attachment for the hose along with liquid soap for much more powerful cleaning than just a hose; just make sure to rinse off all of the soap. Depending on the amount of dirt on your home’s exterior, you might want to use rags and sponges. The more dirt there is, the more scrubbing is needed. It is recommended that any areas with mould or mildew be cleaned with an anti-fungal cleaner. These cleaners are conveniently available at hardware or home improvement stores in your local area.
When scraping some loose paint off the wall, make sure to wear your goggles. Using a paint scraper, putty knife, or wire brush to get the best results with the least amount of time. Consider using a heat gun or rotary paint remover to remove stubborn paint or multi-layered paint. A heat gun resembles a hair dryer and can reach extremely high temperatures, up to 100 degrees Fahrenheit. To prevent fire risks, make sure to wear work gloves and keep the heat gun away from any fresh paint, paint fumes, paint cans, or paint thinner/cleaner. A rotary paint remover, which can be connected to an electric drill, is another tool for removing stubborn paint. The rotary’s rigid wire tines easily strip vast areas of paint. When using this method, use caution since it can never come into contact with your body parts. Before starting on the siding, try practising on a small piece of wood.